 Quick-SE
Quick-L Non-Electronic
Mini-Electronic
Hot Air SE
Grand-SE
Weld Kits
Quick-SE Accessories
 |
| Grand-SE Hot Air Blower |
| by FORSTHOFF |
| The powerful hot air blower for trade and industry |
- This hot air blower can be hand held or built into a machine for continuous operation.
- For use wherever hot air is needed for warming, heating, forming, shrinking or activation.
- Air flow rate of 450 liter/minute depending on the nozzle used.
- Available in 2 versions:
- Grand SE (electronic) with variable temperature from room temperature to 650°C (1200°F).
- Grand L with three heat settings
- Cold switch for cooling down after use— no need to change preset heat setting.
- Air flow can be varied by means of diverse push-on nozzles.
- For hand held operation, the handle is ergonomic and easy to hold.
- Brushes are easily changed from the outside without opening the tool.
- For the painting and decorating industry, the wide slot push-on nozzle removes old paint and varnish easily.
|
| Specifications: |
| Double Insulated: |
 |
| Voltage: |
120 V or 230 V, 50/60 Hz |
| Heating Capacity: |
2200 Watts, 120 V
3000 Watts, 230 V |
| Temperature: |
Variable from 20 to 650°C
electronically controlled |
| Air flow rate: |
450 liters/min |
| Weight: |
2-lbs, 11-oz |
| Cable: |
9-ft, 10-inches |
| Mark: |
 |
|
| Model F1040S |
Grand-SE 3000 W, 230 V |
| Model F1043S |
Grand-SE 3400 W, 230 V |
| Model F0149S |
Grand-SE 2200 W, 120 V |
| Model F0142S |
Grand-SE 3000 W, 230 V 50mm |
| Model F0141S |
Grand-SE 3400 W, 230 V 50mm |
| Model F1030 |
Grand-L Non-Electronic
w/3-Heat Settings (2600 W, 230 V) |
| Model F3065 |
3400W Heating Element, 230 V |
| Model F3064 |
3000W Heating Element, 230 V |
| Model F3066 |
2200W Heating Element, 120 V |
|
|
|
| Accessories |
| F4016 |
20-mm Round Nozzle |
| F4017 |
50-mm Round Nozzle |
| F4030 |
70 x 10 mm Wide Slot Nozzle |
| F4031 |
70 x 4 mm Wide Slot Nozzle |
| F7012 |
Metal Carrying Case |
|
|
|
|
